Intel NUC Windows drivers [downloads] [SOLVED]
If you have a NUC with a clean install of Windows 7 (or 8, 8.1 and Windows 10) you may have some unknown devices and devices without drivers. You can download the driver pack here:
(Intel dl link)
Those drivers will enable the following devices:
- Ethernet Controller (Intel NUC Gigabit Ethernet Controller)
ALTERNATIVE DOWNLOAD: https://downloadcenter.intel.com/download/18713/Intel-Network-Adapter-Driver-for-Windows-7-
(Suggested by Greg in the comments)
- PCI Simple Communications Controller: (Intel Management Engine Interface)
- SM BUS Controller:
- USB 3.0 controller: (Intel USB 3.0 eXtensible Host Controller)
- Unknown device: (CIR infrared device)
Screenshot of Device Manager on Haswell based NUC before installation of drivers:
These drivers may apply to NUC systems:
|Intel® NUC Board D33217CK|
|Intel® NUC Board D33217GKE|
|Intel® NUC Board D34010WYB|
|Intel® NUC Board D53427RKE|
|Intel® NUC Board D54250WYB|
|Intel® NUC Board DCP847SKE|
|Intel® NUC Kit D34010WYK|
|Intel® NUC Kit D54250WYK|
|Intel® NUC Kit DC3217BY|
|Intel® NUC Kit DC3217IYE|
|Intel® NUC Kit DC53427HYE|
|Intel® NUC Kit DCCP847DYE|
searched the net for #ACPI\NTN0530 due to the unknown device listed in device manager. thinking already had installed the IR-driver, but I didn’t. so I noticed that and could fix it – thanx a lot!
Thank you for your comment! I am glad my page helped you get your IR-driver installed so you could have all your devices setup 🙂
well you just saved me a lot of leg work! Thanks buddy!
I am very glad the driver pack helped 🙂 Enjoy your NUC and have a GREAT day!
I needed the Ethernet Controller driver. Link you provided leads to a “page not found” error.
After much searching, i found the driver I needed here:
Thank you kindly for your comment and providing an updated link. I listed in the article above.
Have a GREAT weekend!