Tag Archives: troubleshooting

Troubleshooting a Ruby production application

I am by no means a Ruby expert, but I have been tasked with troubleshooting an existing Ruby application. Specifically some end user DB tasks were failing to save records and the application was throwing a generic error message to the user. By enabling debug logging and viewing the Ruby log file, I was able to see that the application was failing when attempting to send an email confirmation, then it would roll back all the DB changes since the overall

Fix Fujitsu ScanSnap iX500 scanner power problem [SOLVED!]

Q. Hiya. I have a Fujitsu ScanSnap iX500 scanner for my Mac and it will not power on 🙁 I checked the power supply and it is a really expensive scanner, do you know how I could go about repairing it so it will power on again? -Shirley Barnes A. Hi Shirley! I know something you can try. I have the same ScanSnap ix500 for my PC and the scanner has a small button/switch that is normally recessed, but it

uTorrent stuck at 0.0% checking

If uTorrent gets stuck at 0.0% checking, I recommend making sure all magnet links have downloaded their appropriate metadata (filenames etc.) and then shutting down uTorrent. After shutting down uTorrent, start it back up and give it a moment. Your torrents will likely now go past the 0.0% checking stage 🙂 Here are some more links and tips if that does not work for you: uTorrent – Checked 0.0% (Page 1) / Troubleshooting https://forum.utorrent.com/viewtopic.php?id=111756I just updated uTorrent to uTorrent 3.1

MacBook Air dropping wifi? [solved]

Q. My MBA keeps dropping wifi connections, especially when coming up from sleep… it is weird because it prompts me to reenter my WPA2 password every time it does this but even after entering the password it can’t connect! Can you help? A. I have a MBA that exhibited similar issues, so far the best help has been the latest Lion update (10.7.1) Hopefully this update will help you too and get your MacBook Air working well with wifi! If

Fixing dual-monitor problems in Solidworks

My friend Dave does some amazing machining (CNC) work in Ozark, MO.  He recently upgraded to dual monitors on hid work computer but was having the following problem, I’m posting the correspondence here in case somebody else out there has a similar problem… PROBLEM: Dave here.  I wanted to see if you could help me out with my computer from work.  After installing the second monitor I’ve been having a couple issues.  When I have both of my programs up,