Tag Archives: oil

What Oil Should You Run in a Willys CJ-2A? (The Go-Devil Guide)

My son recently picked up a 1946 Willys CJ-2A, and naturally one of the first questions out of the gate was: What oil should I use? Simple question, right? Not so fast. The internet will give you 47 different opinions, two forum arguments, and a guy who swears by bacon grease. So I did the research, dug through the forums, checked the original Willys service manual specs, and put together the definitive guide so you don’t have to. ⚠️ Disclaimer:

Negotiating an Oil and Gas Lease (Creek County OK)

Recommended PDF: Lease clauses and forms, negotiation (RECOMMENDED) http://www.montana.edu/softwaredownloads/energydownloads/MineralLeasingHandouts.pdf Landmen.net – Clauses and Formshttp://www.landmen.net/clausesforms/clausesforms.htm  LEASE PROVISIONSOption to Extend Lease Surface Damages No Surface Operations Oil & Gas Only Royalty Increase Escalating Royalty Clause Minimum Royalty Clause Shut-In Royalty Clause Pugh… Negotiating Your OIl & Gas Lease | Oil, Mineral & Gas Lawhttp://www.kwgd.com/negotiating-oil-and-gas-leaseOne of the more difficult things landowners are called upon to do is negotiate an oil and gas lease.  Oil and gas leases contain many unique terms in the

Changing the oil and oil filter on a Chevy Avalanche [updated for 2013]

Today I changed the oil on our 2011 Chevrolet Avalanche for the first time. A few notes on the process: the oil drain plug (bolt) is located horizontally (sideways), not vertically (downward) like I’m used to. the drain plug uses a 15mm wrench to re-tighten the drain plug, I used 18 ft/lbs torque (the recommendations I found called for between 15-20 ft/lbs) the oil filter is surprisingly small access to the oil filter is generally good, but clearance is tight. most oil